Previous Releases
Update complete name: OS 4.0.74/0xx
This release includes improvements and bug fixes, including:
- Improved barometric pressure calculation during recharge;
- Improved water temperature display in compass mode;
- Improved diving algorithm management;
- Improved TTS calculation;
- Improved PpO2 alerts management (especially in case of 99% O2);
- Avoided clock freezing on reset;
- Fixed an issue on clock time setting;
- General system improvements.
Update complete name: OS 4.0.72/0xx
This release includes improvements and bug fixes, including:
- Improved barometric pressure calculation.
- Improved memory management.
- Improved multi transmitter management.
- Minor system improvements.
Update complete name: OS 4.0.70/0xx
This release includes improvements and bug fixes, including:
- Improved Wireless Transmitter management in case a transmitter is set as "active" but the user is not using the transmitter during the dive.
- Improved Wireless Transmitter gain management.
- Updated total desaturation time calculation.
- Fixed an issue on the planner that may occur in some cases after the full reset of the unit.
- Minor system improvements
Update complete name: OS 4.0.68/0xx
This release includes improvements and bug fixes, including:
- New Constant Sensor Recalibration function. iDive Sport is now able to self recalibrate the pressure sensor while charging.
- New Transmitters-ON Battery Saving mode. iDive Sport is now able to manage the reciver gain to improve battery consumption.
- Improved Battery Management
- Battery voltage is now shown in the INFO menu.
- Minor system improvements
Update complete name: OS 4.0.64/0xx
This release includes improvements and bug fixes, including:
- (iDive Sport Easy and iDive Sport Deep only) PS4 and PS5 BUL conservatism levels are now set as PS4=50/85 and PS5=45/80
- Minor system improvements
Update complete name: OS 4.0.56/0xx
This release includes improvements and bug fixes, including:
- Improved PC communication protocol for a better Subsurface experience
- Improved pressure readings stability on extreme temperatures
- Fixed a graphical issue when showing negative temperatures
- minor system improvements
Update complete name: OS 4.0.54/0xx
This release includes improvements and bug fixes, including:
- If the ascent speed alarm is activated and the computer switches in the ascent speed screen, it will back to the previous screen after a certain amount of time. (iX3M series only)
- Improved RBT calculation in Multi-Transmitter Side Mount mode.
- Improved calculation speed of the Planner in OC and CCR mode
- Fixes an issue that did not allow the calibration of the Sensor board with some Oxy cells in certain cases (for iX3M Reb only).
- Minor system improvements.
Update complete name: OS 4.0.50/0xx
This release includes improvements and bug fixes, including:
- Improved Multi-Transmitter mode.
- Fixes an issue that could stop the update of iX3Ms that are updating from older OS versions.
- Minor improvements to the charging system for some countries.
- Minor system improvements.
Update complete name: OS 4.0.46/0xx
This release includes improvements and bug fixes, including:
- New Power charge Management to handle the new smart USB chargers.
- Improved the Color Coded LED Wireless Transmitter compatibility.
- Improved auto-tank switch in multi-tank transmitter mode.
- Fixes an issue that could display overrated otu or cns in the logbook on some units in CCR mode.
- Fixes an issue that could display wrong GMT time in the logbook record.
- Minor system improvements.
Update complete name: OS 4.0.44/0xx
This release includes improvements and bug fixes, including:
> New features:
- Multi transmitter for Air Integrated iDive and iX3M
(up to 10 for Reb and Tech+, up to 3 for Deep and up to 2 for Easy.
- Side Mount Multi-transmitter mode.
- (for iX3M series only) 180° Flip screen function.
- New, improved, automatic altitude detection.
- Introduced the possibility to manually set the local sea-level mbar pressure value
for a more accurate altitude detection
- Introduced the battery recalibration procedure
- Minor system improvements.
Update complete name: OS 4.0.38/0xx
This release includes improvements and bug fixes, including:
> New features:
- Average depth is now saved for each new dive directly in the iX3M/iDive log
- Average depth is now shown in the iX3M/iDive logbook (only for the new logs)
- (for iX3M series only) Planner now alerts with a colored line if PpO2 is above maximum threshold while planning an OC dive.
- (for iX3M Reb only) Sensor board Oxygen calibration. It is now possible to manually set the % of oxygen (up to 100%) when calibrating Sensor Board sensors.
- (for iX3M Reb only)
Voting logic to validate the Sensor Board PpO2 readings
- (for iX3M Reb only) Visual + vibration alarm on min or max PP02 threshold violation.
> Improvements and bugfixing:
- (for iX3M series only) Fixes an issue that may not allow to set the yellow color in the DISPLAY menu on some units.
- (for iDive series only) In CCR mode the PpO2 value is now always shown in the main screen.
- Fixes an issue that may not allow the unit to show the correct error message in the MIX CHECK app in case the (optional) Gas mix analyser has not been connected.
- Fixes an issue that may not allow the unit to calculate the correct EPT (epatta) value in the MOON app.
Update complete name: APOS 4.0.26/0xx
This release includes improvements and bug fixes, including:
- Improves TX ID values management
- Fixes an issue that could display overrated otu or cns in the logbook on some units.
- Fixes an issue that may not allow to use the deco planner in some situations and on some units.
- Improved charge management
- Minor system improvements.
Update complete name: APOS 4.0.20/0xx
This release includes improvements and bug fixes, including:
- Improved charge and power management
- Restored 50% He and added Pyle Deep Stop (Deep version only)
- Minor system improvements.
Update complete name: APOS 4.0.8/0xx
This release includes improvements and bug fixes, including:
- DiveLogger 4 compatibility
- Ratio® CC Transmitter compatibility (for iX3M "Transmitter Ready" only)
- Minor system improvements.
Update complete name: APOS 3.4.0/010
This release includes improvements and bug fixes, including:
- Improved power management (about +3% autonomy)
- Minor system improvements.
Update complete name: APOS 3.3.4/010
This release includes improvements and bug fixes, including:
- Improved the support for "adaptive chargers" (5v-9v)
- Fixes an issue on the name lablel of "Mix 10" in some units
- Minor system improvements.
Update complete name: APOS 3.3.0/009
This release includes improvements and bug fixes, including:
- Improved power management (about +5% autonomy).
- Improved menu responsiveness speed.
- Minor system improvements.
Update complete name: APOS 3.2.1/009
This release includes improvements and bug fixes, including:
- New "Gas Blander" App for iX3M is installable using the DiveLogger App center.
- Minor system improvements.
Update complete name: APOS 3.2.0/009
This release includes improvements and bug fixes, including:
- Improves the management of the color personalization menu
- Improves the altitude adjustment management.
- Minor system improvements
Update complete name: APOS 3.1.5/009
This release includes improvements and bug fixes, including:
- Improves the management of the charge
- Improves battery life (about +5%)
- Improves the Imperial system handle (ft)
- Adds Imperial system to the GPS
- Improves the Imperial system handle in the menus
- Fixes an issue that could simulate the double push of a button in some menus.
- Fixes an issue that allowed the start of the "demo mode" in some units.
- Deco Stop menu steps now set to 1mt
